Products >
Precast Concrete > Tree Grates
Tree Grates
Wausau Tile
Wausau Tile’s decorative tree grates are the perfect blend of form and function. Available with recesses and drainage slots.
Available Colors
Available Colors
Weatherstone
W20 White
W21 Buff
W22 Sand
W23 Gray
W24 Brick Red
W25 Brown
W26 Charcoal
W30 Star
W31 Fog
W32 Limestone
W33 Misty Gray
W34 Leaf
W35 Rust
W36 Leather
W37 Iron
W38 Night
Light Grind
LG20 White
LG21 Buff
LG22 Sand
LG23 Gray
LG24 Brick Red
LG25 Brown
LG26 Charcoal
Ground & Polished
G20 White
G21 Buff
G22 Sand
G23 Gray
G24 Brick Red
G25 Brown
G26 Charcoal
G30 Star
G31 Fog
G32 Limestone
G33 Misty Gray
G34 Leaf
G35 Rust
G36 Leather
G37 Iron
G38 Night
Acid Wash
A20 White
A21 Buff
A22 Sand
A23 Gray
A24 Brick Red
A25 Brown
A26 Charcoal
A30 Star
A31 Fog
A32 Limestone
A33 Misty Gray
A34 Leaf
A35 Rust
A36 Leather
A37 Iron
A38 Night
Tests
| Type | Result | Method | Size |
|---|---|---|---|
| Compression Strength | Wausau Tile standard is 5000 PSI at 28 days. | ASTM C39 | - |
| Water Absorption | Wausau Tile standard is less than 6%. | ASTM C642 | - |
| Flexural Strength | Non-Standard | ASTM C78 (3rd party test: American Engineering) | - |
| C373 Water Absorption | Not-Applicable | - | - |
| C482 Bond Strength | Not-Applicable | - | - |
| C485 Warpage Edge | Tolerance of +/- 1/8" | 100% Visual inspection of product, Straight edge confirmation as needed. | - |
| C485 Warpage Diagonal | Tolerance of +/- 1/8" | 100% Visual inspection of product, Straight edge confirmation as needed. | - |
| C499 Nominal Size | Tolerance of +/- 1/8" | 100% Inspection, Measurements verified against fabrication drawings. | - |
| C499 Thickness | Tolerance of +/- 1/8" | 100% Inspection, Measurements verified against fabrication drawings. | - |
| Dynamic DCOF | Non-Standard, As specified for walking surfaces only. | ANSI 326.32017 (3RD PARTY: TCNA) | - |
| ANSI A173.1 Section 9.6.1 | Not-Applicable (Tile only) | - | - |
| Avg. Polished Finish | 100% Visual Inspection | Visually compare product to control sample | - |
| Avg. Honed Finish | 100% Visual Inspection | Visually compare product to control sample | - |
| Freeze/Thaw | Non-Standard | ASTM C666 (3rd Party, American Engineering) | - |
| Center Load | Not-Applicable (Pavers only) | - | - |
